Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC

Discontinued - There may be a replacement item available, please call us 877-999-3699
SALE!

Victron BatteryProtect BP-100 - 100AMP - 6-35 VDC

Discontinued - There may be a replacement item available, please call us 877-999-3699

BatteryProtect BP-100 - 100AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the... Read More...

SKU: #248671632860758 | Model: #BPR000100400

BatteryProtect BP-100 - 100AMP - 6-35 VDC

Features:

  • The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
  • 12/24V auto ranging The BatteryProtect automatically detects system voltage 
  • Programming made easy The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen. 
  • A special setting for Li-ion batteries In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual. 
  • Ultra low current consumption This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information. 
  • Over voltage protection To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.
  • Ignition proof No relays but MOSFET switches, and therefore no sparks.
  • Delayed alarm output The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay. Delayed load disconnect and delayed reconnect The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Warranty Info

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.

  • SKU: #248671632860758
  • Weight: 1.10 lbs
  • Brand: Victron Energy
  • Model: BPR000100400
  • Shipping Dimensions: 3.00" x 8.00" x 3.00"

RETURN POLICY


Last updated February 08, 2021


Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, you may return it to us for store credit only. Please see below for more information on our return policy.

RETURNS

All returns must be postmarked within two (2) days of the purchase date. All returned items must be in new and unused condition, with all original tags and labels attached.

RETURN PROCESS

To return an item, please email customer service at customerservice@marinemaster.com to obtain a Return Merchandise Authorization (RMA) number. After receiving a RMA number, place the item securely in its original packaging and the return form provided, and mail your return to the following address:

marinemaster.com
Attn: Returns
RMA #
397 Union Avenue  
Laconia, NH 03246  
United States  

Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return. 

REFUNDS

After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least fourteen (14) days from the receipt of your item to process your return.

EXCEPTIONS    

The following items cannot be returned:
  • special order 
  • clearance 
 
For defective or damaged products, please contact us at the customer service number below to arrange a refund or exchange. 
 
Please Note
   
  • A 30% restocking fee will be charged for all returns.
  • Sale items are FINAL SALE and cannot be returned.
  • returned items must be unopened, unused, undamaged, in original packaging

QUESTIONS

If you have any questions concerning our return policy, please contact us at:
6035564422